maarkr Posted March 17, 2014 Share Posted March 17, 2014 i run my XW-P1 L/R thru the PX line in L/R and heard quite a bit of distortion the other day that i didn't notice before. i looked at the PX line diagram and noticed it goes thru the master compressor and eq of the PX. I thought i turned the master compressor off (didn't i read a post about this being on by default and recommended turning it off?). I ran the XW thru the PX in mono and it sounded clean. Any comments about this? I'm going to run more tests later today and check on settings and different wiring arrangements, so I may edit this later, but just curious if anyone else had any issues with running instruments thru the PX line in/out is stereo? Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted March 17, 2014 Share Posted March 17, 2014 Did you check to see if the external volume setting on the px5 is turned up all the way? Under system settings>sound generator. Quote Link to comment Share on other sites More sharing options...
maarkr Posted March 19, 2014 Author Share Posted March 19, 2014 it's set at 100, prob by default since i haven't used that feature. if the XW vol is over halfway up, it distorts. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted March 19, 2014 Share Posted March 19, 2014 Seems about right. I run the 5s with the ext volume wide open and the G1 under half volume mostly. Try the XW with headphones only and see if it distorts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.