XW-P1
174 files
-
Saw Lead, Saw Lead II, Tyrian, VA Thing
By Peter
Tones from a beginner
All tones except VA Thing are made by layering the same wave and playing with detune and fine tune.
"Tyrian" is an attempt to emulate the sound from Alexander Brandon's music from the good old space shooter, Tyrian 2000. Set the cutoff to -40 for a more subtle tone.
VA Thing is a bit unfinished, since it uses only 3 layers, the others are muted or turned off.
Any constructive suggestions on how to improve these sounds are more than welcome.
Have a nice day !
938 downloads
-
"All" file for XW-P1: 80s, New Wave and Post Punk
By mertyuy
Here is an "all file" with the patches I use, some 80s sounds (Tears For Fears, New Order, Siouxsie And The Banshees, Japan, OMD, Eurythmics)...
More than 40 patches.
Hope that it's useful for someone.
Be careful and back up yur previous settings!
887 downloads
-
Brass SFZ
By montequi
The elusive Brass Swell (or Sforzando) tone! This exists on the earlier WK keyboards, but it's suspiciously missing from both the PX and XW synths. This one will give you a swell when you press it lightly and a punchy brass when you hit it hard. The velocity won't control the overall volume, only the envelope.
For this to work you need all 3 files I uploaded:
BRASSSFZ.ZPF (Performance) - Brass SFZ
BRASS___.ZTN (PCMTone) - Brass - saved at U3-0
XW_SWELL.ZSY (Solo Tone) - XW Swell - saved at U0-1
If you want to save the PCM and Solo tones elsewhere, just edit the Performance and point at those. Zone 1 points to XW Swell. Zone 2 points at Brass. The "XW SWELL" tone doesn't actually produce any sound itself (all oscillators are off). I'm using this for the envelope only, as the Solo tones have more parameters than Hex tones. "Brass" is just the standard brass tone with velocity off.
709 downloads
- Brass Swell
- Brass SFZ
- (and 2 more)
-
Won't Get Fooled This Time
By BrettM
Here is my second attempt at the "Won't Get Fooled Again" organ. It follows on from an XW-P1 discussion called "Arpeggios !" and this time I do use the arpeggiator, with only two steps, to give the basic pulse rhythm. It's based on my previous "Fooled Again" upload, so there is a solo-synth tone to create the slow filter sweep, a performance so chords can be played and now an arpeggiation as well. The arpeggiator has taken over the job of LFO2, so the low frequency clunking that was evident in the previous version as the two LFOs fought over the filter is now gone. You can tweak the total filter parameters in the solo synth to alter the sweep and change the tempo to alter the speed of the pulse. As before, this was done on a G1, so make sure a full drawbar is assigned to zone 2 of the performance to make it work on a P1.
I've just updated the performance to bring the tempo closer to the actual song. Assignable knob 1 and 2 are now set to control the total filter cutoff and resonance respectively.
545 downloads
-
Patricks XW-P1 Collection (ZIP)
By Display Name
Reupload of zip file with corrections.
502 downloads
-
Jump Patch
By Gypsysinger1
This is my goto 80's rock synth patch. See what ya think and play around with it. Hope you enjoy it.
431 downloads
-
All Organs
By Jokeyman123
This is a collection of 18 organ "tones" making up all the organ uploads I could find in the current uploads as of 7/17/2014 for the XW-P1. These should be unzipped and put in your "userdat" folder for transfer with the XW-P1 data editor. .ZDOs are drawbar organs. .ZLT are PCM tones and .ZTN are hex layer organs.
426 downloads
-
0 comments
Submitted
-
0 comments
Submitted
-
Epic Ballad Piano
By amaverick
A hex layer patch. A good ballad type piano. Works on everything from Elton John to the Eagles.
341 downloads
0 comments
Submitted
-
various Hex Layer sounds 001
By Nextname
Don't know if these will be useful, but I thought I'd upload some Hex Layer sounds. General synth bell kinds of sounds and pads and stuff. Here is a demo of these sounds I posted on SoundCloud:
https://soundcloud.com/hypnotuba/casio-xw-p1-hex-layer-demo-001
I also included a Performance called "LoFiBellDron" for use with the sound "bell<>fades". It just assigns the knobs to the DSP effects parameters (in this case, the Lo-Fi effect.) I also added a very simple phrase sequence ("2BarLiveDtne") I recorded which just moves knob K2 back and forth. I use it a lot for automatic detune control for Hex Layers. Turns everything into nice chorusy sounds. lol I included these two files because I use them in the sound demo above.
note: Even though I put an "001" at the end of the file name, I doubt I'll ever upload 1000 different bundles of hex layer sounds.
338 downloads
-
SOFT ANALOG PAD
By eddieriff
A little tweak to 'SIX SAW synth' that I'd previously downloaded from this site. It's equally as good as a very similar patch I use often on my Motif XF.
333 downloads
0 comments
Submitted
-
String It Xw
By amaverick
Wanted a good string sound. Works great for songs like -May It Be from the L.O.T.Rings
324 downloads
0 comments
Submitted
-
Tom Sawyer.ZSY
Rush's Tom Sawyer cutoff sweep sound. Created by using two sawtooth waves and filter envelope. It's my first post to the community, so every comment is welcome
321 downloads
0 comments
Submitted
-
Pad/Str/Pno
By amaverick
Hex layer patch.
Sliders 1 and 2 are stereo panned pads.
Sliders 3 and 4 are stereo panned strings
Slider 5 is a piano.
A pretty mellow patch. Works good on anything from Canon in D to " Heaven" by Bryan Adams.
317 downloads
0 comments
Submitted
-
Extreme Piano
um som de Piano com uma
edição simples, porém melhorou significativamente.
usei o um PCM Piano 00 ( Stereo Grand Piano).
a partir dele fiz as seguintes alterações:
Atk . Time [+40]
Rls. Time [+20]
Cutoff [-12]
___________________________________________________
Piano sound with a
simple editing , but improved significantly.
I used a PCM Piano 00 (Stereo Grand Piano) .
from it I made the following changes:
Atk. Time [ 40 ]
Rls . Time [ 20 ]
Cutoff [ -12 ]
312 downloads
-
Epic Organ
By amaverick
Organ sound with some choir and strings. Would work good for Whiter Shade Of Pale or House of the Rising Sun.
301 downloads
0 comments
Updated
-
Lead Electric Guitar (Solo Synth)
By AlenK
My attempt at some lead guitar sounds using the solo synth. All three use the modulation wheel for something other than vibrato.
(1) Lead Guitar.ZSY is based on an overdrive guitar PCM wave (0312) with some mild distortion added. It uses the mod wheel to increase release time.
(2) LeadGuitrHrm.ZSY uses the same base sound but the mod wheel crossfades it with a detuned guitar harmonic PCM (0328). Rolling the wheel up after a sustained note introduces what hopefully sounds like feedback.
(3) LdGtrAutoHrm,ZSY uses the same PCMs as (2) but adds an envelope to the harmonic sound that automatically fades it in if a note is held for a few seconds. The mod wheel determines how much of the harmonic sound is heard.
299 downloads
0 comments
Updated
-
Just What I Needed Lead
By eddieriff
A passable synth lead for use on Just What I Needed by the cars. The mod wheel gives a nice emulation of the actual sound an the record at the end.
295 downloads
0 comments
Updated
-
Watcher of the Skies HL
By g.rotunno
Hi all!
Well this is my first attempt to achieve a good sound of Genesis' masterpiece Watcher of the Skies intro.
Tony Banks, in the original song, played a Mellotron (string based) passed through a Leslie Rotary effect; I made a Hex Layer with two kinds of strings (layers 1 to 3), two kinds of brasses (4 and 5) and the last layer is an organ (the last part of the intro is an organ), all with a DPS Rotary effect.
Hope you enjoy!
A special thank goes to Scott Hamlin who helped me searching the right sounds.
292 downloads
- Genesis;
- Watcher of the skies;
- (and 3 more)