Search the Community
Showing results for tags 'Synth'.
-
566 downloads
A Stage Setting inspired by what was started during Live Clinic #2....although the final product went a different direction. Sliders 1-2 control filter for the pad. Knobs 1-4 control the sound of the arpeggiated part. Enjoy. Audio Demo: https://soundcloud.com/casiomusicgear/casio-px-5s-orbiting- 3 comments
- 2 reviews
-
- 1
-
- Mike Martin
- Hex Layer
- (and 4 more)
-
Version 1.0.0
61 downloads
Here's a Hexlayer Tone called "SomethingNew" I did some time ago. It has a brassy (synth) kind of sound to it. Also, when you release the keys the sound is programmed to sort of talk back at ya If you use the stagesetting PLAYFULL.ZPF (instead) and you hard-press the keys in the lower keyboard range you'll hear an arpeggio. I included a sound demo (of the stagesetting) as well. Have fun with it. Jay 🎹 -
- 1 comment
- 15 reviews
-
- Xtreme Synth
- PX-5S
-
(and 6 more)
Tagged with:
-
491 downloads
A pad sound utilizing some of the new waveforms added in v1.10. Also features portamento. Lots of great real-time control: Knob 1: Detune Knob 2: Portamento Time Knob 3: Attack Knob 4: Release Slider 1: Filter Slider 2: Resonance Slider 3: Phaser Depth Slider 4: Chorus Slider 5: Delay Slider 6: Reverb -
What Pedals work with the XW-seriesCasio SP-20 Casio SP-3R Pedals from Kurzweil and Korg also work as well as the switchable M-Audio, Roland and Yamaha will not. Can I used the Solo Synth and Hex Layers, or Drawbar organs at the same timeNo, only one of them can be used at a time on Zone 1.
-
-
Version 1.0.0
32 downloads
Tastiera divisa, synth nella parte alta della tastiera e piano e organo sulla parte bassa. Il volume dell'organo controllabile con slider 1, il portamento con pedal 2. Divided keyboard, synth in the upper part of the keyboard and piano and organ in the lower part. The volume of the organ controllable with slider 1, the portamento with pedal 2. -
740 downloads
Pink Floyd's On the Run - Here is the Stage Setting that created the demo that is on SoundCloud. The main sequence is triggered on the E2. The Helicopter is on F2 Drones from G2-D3 The Heartbeat is on E4 (way too low in pitch, I need to fix) Slider 1 - Filter Cutoff Slider 2 - Resonance Modwheel - Filter LFO- 2 comments
- 2 reviews
-
Can anyone recommend a great synth to go in the backgroundto download from here. I play lots of new age contemporary christian and looking for some good sounds. Any help is appreciated Casio PX 560m
-
Version 0.1
4,005 downloads
Ok, a few Hex Layer presets, two Stage Settings and two mp3 for Hex Layer demo sounds... I was inspired by vintage analog synth sounds and mood... I used 3 oscillators for each Hex Layer... I made 2 Stage Settings splitting 2 Hex Layer each one; Sliders 1 & 2 are the volume zones ...(you can hear mp3 demo)... Feel free to use them if you like... -
I've done an re-issue totally for the PX5S this time a song about the adventures in a far away galaxy where there is a world with surrounded by planets that world is as big as the moon Titan. But what is Ghorak-V really. Everything is done in song mode except the pad which I've used arpeggio on so its a full phrase / arpeggio song :D. I've got to learn more about song mode and programming special voices to use on it cause like XW-G1 once you get the hang of it, It turns into a sonic creative addiction XD. Used two drum tracks on this the mix isn't up to par the song isn't complete or done well but i've learned song mode for a change.
- 5 replies
-
- xw-g1
- performance
-
(and 2 more)
Tagged with:
-
Hi, i try to make this particular sound but i cant make a decent one, I use Sine lead and a lot of FX but not sound good any idea? * I upload the song is Above teh Storm - Stick Figure, the sound start at 00:12 and finish at 00:22 Stick Figure – Above the Storm (Official Music Video).mp3 Thanks
-
I'm an Artist now in my own way why because I appreciate an instrument that takes me places. The XW-G1 is my go to inspiration keyboard what I do with it I've learned through the years. My thanks to all of you for this journey and here is the journey I want to take you in where it got me now. Enjoy
- 16 replies
-
- 1
-
- casio xw-g1
- sample looper
-
(and 2 more)
Tagged with:
-
Hi i am selling my HZ600 anyone interested? http://www.ebay.co.uk/itm/201838601525?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 I can also sell it outside ebay, make me an offer! Thanks! ( i am not sure if this is allowed on this forum, but if its not ill just remove the post, accept my apologies!) Bye, from another Casio Freak! Paolo
-
Hi all, so the WK-3000 manual says that the Registration Memory stores (among others) the synthesizer mode settings. Those are, for example, OctShift (octave shift) and level (loudness). However, when I store some settings and then re-open them with the BANK button, these settings are gone and set to default. For example, I want the layered instrument to be only level 60 (default is 120). I save the settings. They work. But as soon as I re-open them, the settings are level 120 again. Same applies to Octave shift (very annoying!!) and probably all other synth settings. Other settings like instruments, layer, split and so on are saved, this issue seems only to affect the synth settings. This way I really can't use registration memory at all because I would have to manually re-adjust everything in synth settings each time. Does anyone else have this problem? Is there some kind of official statement why it does not work? Thanks!
- 3 replies
-
- memory
- registration
- (and 4 more)
-
No no noo my XW is behaving strange on me buttons are not acting screen is jumping functions on every button action, Me think its slowly giving its last breath, I have to operate it or send it out for recovery before it plugs itself out.
-
-
-
- 1
-
- compressor
- synth
-
(and 6 more)
Tagged with:
-
Version 1.0.0
1,320 downloads
I've probably spent more time on this Stage Setting than any other. This is a 4 zone Stage Setting set up as follows: Zone1: Strings Zone2: Pad Zone3: Synth Arp Zone4: Piano Sliders 1-4 correspond to volume of each of those. It starts with the volume of zones 1-3 set to 0. Slider 5 is a wonderful stereo panning delay for the piano part. What makes this Stage Setting different is the way each of the parts are voiced. This Stage Setting is "radio ready" or performance ready in that it utilizes a narrow amplitude dynamic range while still remaining remarkably expressive. Pedal 2 is an essential element of this Stage Setting as it is set up to toggle the filter. This allows this Stage Setting to breath. This is an especially unique and powerful aspect of the PX-5S. Enjoy.-
- 13
-
- mike martin
- arpeggio
-
(and 3 more)
Tagged with:
-
PianoScape View File I've probably spent more time on this Stage Setting than any other. This is a 4 zone Stage Setting set up as follows: Zone1: Strings Zone2: Pad Zone3: Synth Arp Zone4: Piano Sliders 1-4 correspond to volume of each of those. It starts with the volume of zones 1-3 set to 0. Slider 5 is a wonderful stereo panning delay for the piano part. What makes this Stage Setting different is the way each of the parts are voiced. This Stage Setting is "radio ready" or performance ready in that it utilizes a narrow amplitude dynamic range while still remaining remarkably expressive. Pedal 2 is an essential element of this Stage Setting as it is set up to toggle the filter. This allows this Stage Setting to breath. This is an especially unique and powerful aspect of the PX-5S. Enjoy. Submitter Mike Martin Submitted 06/07/2016 Category Acoustic Pianos and Piano Layers
-
SilkySmooth2 View File A variation on a stock preset, the Silky Smooth2 press is a little darker, wider in the stereo field and has a phaser effect for some extra animation. This is a Hex Layer tone so a Hex Layer category tone must be selected in Upper1 before going to the Media menu to load this file. Submitter Mike Martin Submitted 06/02/2016 Category Privia PX-560
-
Version 1.0.0
549 downloads
A variation on a stock preset, the Silky Smooth2 press is a little darker, wider in the stereo field and has a phaser effect for some extra animation. This is a Hex Layer tone so a Hex Layer category tone must be selected in Upper1 before going to the Media menu to load this file. -
Is there a smaller Casio that has the same synth sounds as the Px5s or better?
-
Wish You Were Here View File As requested on the Facebook group here is a quick synth sound for the song Wish You Were Here by Pink Floyd. This is a Hex Layer tone. 2 layers are being used for the synth brass part. This is mapped on the keyboard up to E5. A 3rd layer has the white noise (wind) sound which is also using the stereo delay insert effect. This is mapped to keys F5 and higher. If I were to build a registration to perform this song, I'd set it up with a Piano in the LOWER1 location and this HexLayer tone in the Upper 1. Take a look at the attached photo which shows octave switches and split point recommendations. Submitter Mike Martin Submitted 04/04/2016 Category Privia PX-560
-
- pink floyd
- wish you were here
-
(and 3 more)
Tagged with:
-
Version 1.0.0
888 downloads
As requested on the Facebook group here is a quick synth sound for the song Wish You Were Here by Pink Floyd. This is a Hex Layer tone. 2 layers are being used for the synth brass part. This is mapped on the keyboard up to E5. A 3rd layer has the white noise (wind) sound which is also using the stereo delay insert effect. This is mapped to keys F5 and higher. If I were to build a registration to perform this song, I'd set it up with a Piano in the LOWER1 location and this HexLayer tone in the Upper 1. Take a look at the attached photo which shows octave switches and split point recommendations.-
- 4
-
- pink floyd
- wish you were here
-
(and 3 more)
Tagged with: