babamama Posted June 2, 2015 Share Posted June 2, 2015 Hi, I'm not really understanding how to differentiate from bringing up the reverb on the editor in the channel, and how that interacts via the slider? I was hoping that you could have delay/reverb on some channels but not on another channel, and then use the slider to control this, but when I tried the slider then brings reverb back on the channel that you don't want it on. Thanks. Quote Link to comment Share on other sites More sharing options...
Display Name Posted June 2, 2015 Share Posted June 2, 2015 What channel are you referring to? Quote Link to comment Share on other sites More sharing options...
babamama Posted June 3, 2015 Author Share Posted June 3, 2015 When your looking at the the four parts you see each part has a reverb & delay and choirs sends, but the piano on part two does not get reverb when I bring slider 6 up, but part 4 does, also slider 5 brings up the delay on both part 2 and 4 but the reverb won't come up on part two. Thanks. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted June 3, 2015 Share Posted June 3, 2015 Looks like it should work. Slider is target to Reverb...Slider is enabled for the zone. Check and Check. Have you turned off the other zones to listen to the piano alone? Quote Link to comment Share on other sites More sharing options...
Display Name Posted June 4, 2015 Share Posted June 4, 2015 ^^ THIS! ^^^^ Quote Link to comment Share on other sites More sharing options...
babamama Posted June 5, 2015 Author Share Posted June 5, 2015 Thanks all. Had to turn EVERYTHING OFF and back on, and all's good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.