Muziko70 Posted March 21, 2021 Share Posted March 21, 2021 HELP! I just got my Casio CT-X700 this past week and I'm already ready to body slam it on the concrete and beat the living daylights out of it with a sledge hammer. Main Issue: Here is what I'm simply trying to do and what the results are. I am using PERC ORGAN 2 (070) Tone and TEX-MEX (096) Rhythm. I set all the rest of the settings the way I want them. I then record the Bass, Rhythm & Drum Beat to my various medleys. I'll then attempt to play that back so that I can add the Lead in real time. The results are inconsistent. Sometimes my 1-Man Band will work out great, just as designed. Other times inexplicably the Bass & Rhythm Chords will not have been recorded. Then it'll get worse. I'll get an Err Data Full error. The troubleshooting tips say that I'm trying to record more than 5 songs ... and that I should delete some. The question is --- HOW do I delete the previous songs? I don't like this old recordings accumulation bit. It used to be so easy and efficient on my previous Casio CTK-650 whereby each new recording replaced the previous recording. I've even tried setting the keyboard to Factory Defaults and that doesn't empty out the recordings accumulation. I've checked out the User's Manual, but from my take, they appear to only mention how to delete "songs" and "tracks" from the SONG BANK ... not the random songs that I'm recording. Maybe it's in there somewhere and it's escaping me. 1 Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted March 21, 2021 Share Posted March 21, 2021 The directions for deleting a song and track is what you are looking for. The songs you are recording are considered part of the song bank, user songs being 171-176. As far as recording rhythms, make sure you're using track 1. The other tracks will not record a rhythm. 1 Quote Link to comment Share on other sites More sharing options...
Muziko70 Posted March 21, 2021 Author Share Posted March 21, 2021 Ahhh, that "171-176" is definitely a monumental piece of info. I had no idea to what the instructions referred when they said to enter the song number. I was drawing a blank. I'd go into the song bank and start seeing Twinkle Twinkle Little Star and what have you. I'd immediately surmise I was in the wrong section to delete MY songs. Follow Up Question #1: How do I ensure that I am on Track 1? I HAVE seen that on the display, but how do I select Track 1 if it should happen to NOT be there when I'm about to record? Follow Up Question #2: At this point I have only vaguely read about being able to save Settings Setups to Registration. These Settings Setups that are saved --- Are they saved to non-volatile memory? Will they remain intact and available even after the keyboard has been powered down and adapter power and battery power removed? That would sure be a lifesaver. Cuz having to re-enter all the settings after every power up BITES. Oh and THANKS for your reply and very valuable info, Brad. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted March 21, 2021 Share Posted March 21, 2021 1. According to the manual, once you press record/stop and "Rec Trk" is displayed, use the + - buttons to select a track. 2. Everything is saved in flash memory. No power is needed. It will remember settings indefinitely. 1 Quote Link to comment Share on other sites More sharing options...
Muziko70 Posted March 21, 2021 Author Share Posted March 21, 2021 Thanks again for the additional info, Brad. I'm about to go out and about to do this and that. When I come back, I'll put to use all your info. Hopefully the results will be just the ticket that I was looking for. I'll let you know later how things went. Quote Link to comment Share on other sites More sharing options...
Muziko70 Posted March 22, 2021 Author Share Posted March 22, 2021 WHEW! I'm worn out, but ... I THINK I finally figured it out. I first encountered yet more hits & misses and inconsistencies and my CT-X700 was beating me like this and had me But, after some more reading over and over, performing analysis and trial & error, I THINK it finally made sense. I cleared out locations 172 through 176. I then made it a point to keep every current song / medley always recorded at location 172 MltRec 1 ... and cleared it out before going to a new song / medley. And it WORKED! I'll have to wait until tomorrow to try out the Settings Setup Savings in the Registration Bank bit. Thanks for your help, Brad. I took the scenic route, but eventually, with your help I got with the program. 2 Quote Link to comment Share on other sites More sharing options...
Yannick Odjay Posted August 22, 2021 Share Posted August 22, 2021 Hi! I don't know anything really about Piano. But I am trying it and I want to record a song but that error data full keep showing and I don't know what to do. What to click. I'm afraid I might do something bad in this. It's says it's a Casio CT-X700. Pleaseeeeee! Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted August 22, 2021 Share Posted August 22, 2021 Recorder memory is full. You need to delete some recordings to free some space. Quote Link to comment Share on other sites More sharing options...
FlashyEagle8 Posted December 5, 2023 Share Posted December 5, 2023 I’ve been creating a Song (with fav instrument) and at’the moment wantednto’add’a Ryhthm,’ I showed me Err Data Full. I know u need to Space out memory by deleting some elements, obviously few songs, but my question is - Does deleting some User Tones can also help to Free some Space from the Memory - is there a way to check the Song’s Space Capacity in the Casio? Maybe in Function/Setting/system ? So far, i’ve managed to save on Flash and delete few songs .which’worked, and realised how long was my Song...so it was normal to be Full. For Casio’s Memory Capacity, can someone remind me’: - how much it has in Keyboard? - how much it is on an average Song ? - if u can add extra Internal Storage Memory like SD or its just done with FlashDisk Transfering ? Thanks ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.