Jump to content

Brad Saucier

Administrators
  • Posts

    9,023
  • Joined

  • Last visited

Files posted by Brad Saucier

  1. Organs with Rotary Control Registration Setup (CT-S1000V and CT-S500)

    Organ registration bank with 4 registrations.  Each registration contains a different organ tone.  Use the knobs to control the sound. 
     
    K1 - Overdrive Gain
    K2 - Fast Target Rate
    K3 - Fast / Slow Toggle 
     
    To install: Click download. Store the downloaded file in the MUSICDAT folder of a USB flash drive and transfer the drive to your CT-S1000V.  Press menu>media>load>reg bank.  Proceed with the prompts to store the registration bank in keyboard memory.  Press the registration button and select the bank you stored them in.  

    71 downloads

       (2 reviews)

    0 comments

    Updated

  2. MZ-2000 MIDI Implementation Manual

    Here for backup purposes 

    16 downloads

       (0 reviews)

    0 comments

    Submitted

       (0 reviews)

    0 comments

    Updated

  3. Octave/Normal Concert Grand

    A stage setting that can be normal piano or a 1 octave layered piano by using slider 1 to adjust expression level of zone 2. 

    107 downloads

       (0 reviews)

    0 comments

    Submitted

  4. PDF file (Video Index) for Casio PX-5S Mike Martin Live Q & A 072321 Webinar

    Special thanks to Gary for creating and sharing this video index to the latest PX-5S webinar on YouTube.  Link to the video referenced by the PDF is as follows... 
     
     

    38 downloads

       (0 reviews)

    0 comments

    Submitted

  5. Staccato (Choppy) String Section

    A stereo string sound good for staccato play. It has an Amp envelope applied as well.  

    380 downloads

       (1 review)

    1 comment

    Updated

  6. Duffy Pizzicato

    A Pizzicato hex tone suitable for playing Mercy by Duffy.  Short demo WAV file included. 

    108 downloads

       (0 reviews)

    0 comments

    Submitted

  7. Brad's Country Shuffle (CT-X5000/3000)

    I've created a totally new country shuffle rhythm on the Casio CT-X5000. This should also work well in a CT-X3000. This is a very simple rhythm with no frills, as any good keyboard country rhythm should be. It's extremely versatile, sounds authentic and can be used for tons of country rhythm tunes. The intro is a simple drum stick count-in.  In the demo linked below, I'm using a custom piano tone (Piano2- included) to play the intro, lead, and ending over the backing rhythm elements. The rhythm does not play these piano parts for you. What is included in the rhythm is the drum track, a rhythm guitar and a rhythm piano. There are 2 fill-in elements, an intro and ending. Variations 1/2 are repeated as variations 3/4 respectively, but are remixed with piano rhythm taking a slightly more prominent position in the mix. 1/2 have rhythm guitar slightly more prominent than piano in the mix.  Don't forget to comment, like and share any recordings you make with this rhythm.  I hope you enjoy it!  
     
    Song Demo: Ray Price - City Lights
     
    Note: I left some mistakes in my piano playing to prove I am human.  No, not really...   
     
     

    274 downloads

       (2 reviews)

    0 comments

    Updated

  8. SyFi Strings (CT-X3000/5000)

    No sooner I upload the 11 tone pack, I created a tone I like so much I had to upload it.  This started out as basic strings, but adding a DSP chain to it and tweaking the effects a bit made a really interesting tone.  It's some EQ plus phaser, delay and a pitch shifter.  Quick demo here....
     
     
     
     
     

    220 downloads

       (0 reviews)

    0 comments

    Submitted

  9. 11 Tone Variety Pack (CT-X3000/5000)

    These are some personal tones I have edited .  The 3 guitars are variations of effects and amp cabs.  The other tones are mostly done with some significant DSP EQ applied.  Some of these play louder than others so watch your hearing....  
     
    StPV - Stratocaster Peavey Amp
    StratFG - Stratocaster Flanger
    BrtStrt - Bright Stratocaster EQ'd
    Brass 2 - EQ'd
    BrasFal2 - Brass Fall 2 EQ'd
    BrasFal3 - Brass Fall 3 EQ'd
    Brass 3 - EQ'd
    CjnAcdn - Cajun Accordion EQ'd
    DeePipe - Pipe Organ Deep Bass EQ'd
    ActBasF - Acoustic Bass EQ'd
    TSax EQ - Tenor Sax EQ'd
     
     

    2,299 downloads

       (1 review)

    0 comments

    Updated

  10. FlyBy Sound Effect (Hex Layer Tone - PX-5S)

    A simple fly by wind sound effect for the PX-5S.  
     
    Audio demo: https://soundcloud.com/bradmz/flyby-sound-effect-hex-layer-tone-px-5s
     

    49 downloads

       (0 reviews)

    0 comments

    Submitted

  11. Mellotron Flute (PX-5S)

    This is simply a Mellotron style flute tone.  For your convenience, I uploaded it as a stage setting and as an individual hex layer tone. Pick your favorite way to install it on your PX-5S.
     
    Audio demo: https://soundcloud.com/bradmz/mellotron-flute-hex-tonecasio-px-5s
     

    193 downloads

       (0 reviews)

    0 comments

    Submitted

  12. Stack Strat

    One of the first edited tones I made on my CT-X5000. It's a strat guitar into a bass stack amp sim and mic sim using the revamped dsp system in the CTX series.  
     
    https://soundcloud.com/bradmz/stakstrat
     
           
     

    147 downloads

       (1 review)

    0 comments

    Updated

  13. XW-G1 - Sweet Dreams (are made of this)

    This was something I originally did on the PX-5s. I have heard some people use the XW's for this song. I decided to give it a go myself.
    This is a step sequence and performance file along with custom melody tones for playing this song.
    Demo on my soundcloud page....https://soundcloud.com/bradmz/casio-xw-g1-sweet-dreams-are-made-of-this
    SweetDreams.ZPF - The performance file that brings everything below together.
    SweetDreams.zip - Uncompresses as the ZSS step sequnce file used in the performance file above. Place in U:1-6
    SweetLead.ZTN - Tone used in the performance zones 1 and 2. Place in U:107.
    SawSweet.ZTN - Tone used in the step sequence parts 10 and 11. Place in U:106
    SquareSweet.ZTN - Tone used in the step sequence parts 12 and 13. Place in U:105
    Bender wheel is disabled for the lead sounds. Pitch bend is tuning the tom drum hit in the step sequence by way of the sequencer control track.

    984 downloads

       (1 review)

    0 comments

    Updated

  14. Concert Grand 2 and Finger Bass 5 (MZX series studio tones)

    These are two variations of factory tones designed to fit more easily into a mix.  The volume differences between quiet and loud are not as wide, allowing easier blending when a more consistent volume level is desired.  
     
    Concert Grand 2 brings a new EQ setting to the piano, plus a reduced dynamic range
    Finger Bass 5 brings reduced dynamic range and faster decay time

    338 downloads

       (0 reviews)

    3 comments

    Submitted

  15. MZ Accordion (MZ-X500 - Hex Layer Tone)

    A new accordion tone using the power of hex layer synth.  This uses factory wave data in a clever way, no new wave data is loaded with this tone.  

    209 downloads

       (1 review)

    1 comment

    Submitted

  16. Ukulele Strumming (MZ-X500)

    Here is a demo of the sound you are downloading....  https://soundcloud.com/bradmz/ukulele-strumming-demo-casio-px-5s
     
    UKULE2.ZLT is a hex layer tone. 
    UKULELST.ZAR is an arpeggio pattern.
     
    Load these two files into your MZ-X500.  Select the new Ukulele tone as Upper 1 tone.  Enable the arpeggiator and select the new Ukulele arpeggio pattern.  The hex layer tone will have the muted strum sound in the lower octave, while the rest of the keyboard will be for open strumming.  To play the pattern, use a rhythmic back and forth between your sustain pedal and the muted strum in the left hand while holding chords with your right hand for the arpeggiator to use. Release the sustain pedal and play the muted sound almost simultaneously.  To play the strum manually as in the second part of my demo, disable the arpeggiator and practice playing chords in a sweeping motion as if you are strumming with a flat pick on guitar strings.  

    239 downloads

       (0 reviews)

    3 comments

    Submitted

  17. Sweet Dreams Stage Setting (PX-5s)

    If you use this stage setting, please let me know if you like it and how you used it.  I learn music by ear.  This stage setting started as I was learning how to play the song.  I carefully listened to left and right channels of the original recording, trying to hear how it was played.  Once I learned it well enough to play it myself,  I recorded it into the sequencer on the MZ-2000, then converted that recording into phrases for the PX-5S.  The rest of the work involved editing PX-5S tones until they sounded like the sounds heard in the original record.  
     
     
    I have recorded an Audio Demo of this. Click the download button to see it in the list of available downloads.
    or click here for soundcloud...https://soundcloud.com/bradmz/eurythmics-sweet-dreams-ver-2
    ____________________________________________________________________________________________________________
    This is a stage setting and sounds for playing the song Sweet Dreams by the Eurythmics.
    Sweet Dreams is the Stage Setting. Sweet Arp is the phrase that plays the synth sounds. Place this phrase in slot 120 Sweet Beat is the phrase for the drum pattern. Place this phrase in slot 121. Once loaded, make sure the Arpeggiator lamp is lit, then hit any key in the low end to start the pattern playing. The Synth Lead sound is in the upper range for playing the solo.

    2,169 downloads

       (6 reviews)

    11 comments

    Updated

  18. The Jazz Guitar (PX-5s Hex Layer)

    A different Jazz Guitar than the factory Jazz Guitar tone. I might say it's even better than the factory tone. 

    277 downloads

       (0 reviews)

    3 comments

    Updated

  19. Sledgehammer Brass and Shakuhachi (PX-5s Stage setting)

    For playing the song Sledgehammer. Slider 1 turns a synth layer on/off for the high part.
    Hex tone files are available for individual use.

    646 downloads

       (0 reviews)

    0 comments

    Updated

  20. Toy Piano (MZ-X500)

    Toy Piano. A tone that takes advantage of the expansion memory in the MZX series.  This tone loads new sample data into the keyboard.  The file was edited on an MZ-X500.  MZ-X300 is untested. 
     
    Demo:  https://www.youtube.com/watch?v=a0WcaBj28qo
     

    108 downloads

       (1 review)

    0 comments

    Updated

  21. Old Upright (MZ-X500, hex layer)

    A very different piano sound from the presets.  Using hex layer synth mode, split shifting the factory piano samples dramatically alters the timbre.  The result is a sound reminiscent of the old upright piano I grew up playing.  This was a tone I originally programmed for the PX-5S, now ported to the MZ-X500.  

    232 downloads

       (2 reviews)

    0 comments

    Submitted

  22. PA Concert Grand

    Yet another EQ'ed concert grand.  This is a bright sound with good bass (smiley face EQ curve).  This one offers help for those who may use problematic PA speakers and amps that make the piano sound muddy or dark.   If you are a heavy handed player, adjust system settings>general>touch to heavy.  Use LIGHT if are are a light player.  

    896 downloads

       (0 reviews)

    8 comments

    Updated

  23. Old Upright

    A significantly different type of piano sound for the PX-5S. The end result reminded me of my old Brambach upright.  I like this piano played through speakers rather than headphones. Enjoy!

    596 downloads

       (4 reviews)

    4 comments

    Updated

  24. TheCarsLetsGo Solo Lead Synth (XW-G1)

    NOTE: This works only on the XW-G1. Download the MP3 demo to get an idea of what it is supposed to sound like.
    A quick attempt to get the famous sound heard in the song by The Cars Let's Go.

    256 downloads

       (1 review)

    2 comments

    Updated

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.