mrdinkle Posted December 6, 2021 Share Posted December 6, 2021 Hi! So I recently bought a Casio Privia PX-S1100 and one of the reasons I got it was the included WU-BT10 allowing me to do MIDI over Bluetooth. However, when I try to pair two devices over the WU-BT10 MIDI device, my host device does not complete the pairing. The keyboard rings the "connection successful" sound, but my host device stays on "Pairing..." until it times out and the connection drops. I've tried this on my desktop, my laptop (both running Windows 10), and my phone (an LG G7 running Android 10). Conversely if I try to pair with the Bluetooth Audio feature and the WU-BT10 AUDIO device, everything works as intended and I can use the keyboard as a speaker. I've checked the manuals for both devices and the Casio Canadian Support Centre but the support centre redirected me here stating that they can't be of further help. Would anyone know what might be happening or if I'm missing a step on the process? Thank you! I may return to the store I bought the keyboard from and ask if I can try the module on other Casio devices to see if it's an issue with the keyboard. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted December 6, 2021 Share Posted December 6, 2021 Although the MIDI connection does show up in the pairing menu in Android, pairing is done within the app you use. The Android Bluetooth pairing menu is only used for audio. Make sure Bluetooth is enabled on your phone before beginning. Plug in the Bluetooth adapter, power on the piano, then open Chordana Play for Piano on your Android phone. Go to connection setting in the app and tap on Bluetooth MIDI Device, then tap on the adapter name. It should connect and give a successful message. Unfortunately I'm not aware of any workarounds to use the BT MIDI connection on this adapter with Windows, although BT audio does work well. 1 Quote Link to comment Share on other sites More sharing options...
Magnumpi Posted December 11, 2021 Share Posted December 11, 2021 I have the same issue on windows 11... after keyboard play success arpeggio thing windows keeps trying to connect and eventually fails Quote Link to comment Share on other sites More sharing options...
Mike Martin Posted December 11, 2021 Share Posted December 11, 2021 Windows 10 or 11 by default does not support Bluetooth MIDI. There are some third party utilities LoopMIDI and MIDIBerry that some people use. I'm mostly on Mac these days so I haven't had an opportunity to diagnose it myself. Quote Link to comment Share on other sites More sharing options...
bloomchez Posted January 5, 2022 Share Posted January 5, 2022 Same thing happening with my pxs-1100, my Samsung s9, and pixel XL both cannot connect thru Bluetooth at all, it just fails to pair and plays the arpeggio tune. The chordana app also doesn't scan/can't find the WU-BT10 MIDI device at all. This really sucks since I chose this one over the pxs-1000 for the upgraded Bluetooth capabilities... Will just be trying to use the app with a USB c to b connection Quote Link to comment Share on other sites More sharing options...
Piano Tone Posted January 18, 2022 Share Posted January 18, 2022 I found with my PXS1100 that the BlueTooth MIDI was so laggy it wasn't usable anyways - I'm using a cable. The BlueTooth audio works fine Quote Link to comment Share on other sites More sharing options...
SergeyVA Posted April 17, 2022 Share Posted April 17, 2022 (edited) I had a problem connecting wu-bt10 midi adapter (on CASIO PX-S1100) to phone in Chordana Play for Piano. It was necessary to enable the location on the phone. By default, I have it turned off, I turn it on only when necessary. I allowed the application access to the location, but did not include the location itself. When I turned it on, the adapter immediately appeared in the list Bluetooth Midi Device and the connection was successful. Edited April 17, 2022 by SergeyVA remark Quote Link to comment Share on other sites More sharing options...
socurious Posted October 22, 2022 Share Posted October 22, 2022 I have Casio PX-S1100, I just installed on mobile the new app "Casio Music Space". At first attempt, BT MIDI connected and remote control functions worked. The I switched off, when I was back ... no way to connect anymore! It confirms that it is connected but when trying the remote control it shows the message "This function requires a connection to a compatible digital piano". So the same kind of problems with the old app Chordana, no way. Extremely disappointed. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted October 22, 2022 Share Posted October 22, 2022 30 minutes ago, socurious said: The I switched off, when I was back ... no way to connect anymore! Did you close the app after you turned off the piano? And restart the app after you restarted the piano? Quote Link to comment Share on other sites More sharing options...
socurious Posted November 7, 2022 Share Posted November 7, 2022 @Brad Saucier: yes, I managed to make it work again, but I confirm that the connection management is weak. You should not be obliged to restart piano (and in any case it could not work, as I told) Also the fact that it confirms connected but than it does not work means that something must be fixed (and the message that I don't have a compatible piano is a non-sense) Besides, my mobile is new and performing, so it is not questionable (for compatibility or responsivity on the interface). My invitation for the company to work either on the app or on the piano fw, to make it more mature. Thanks Brad ;-) Quote Link to comment Share on other sites More sharing options...
Sbc Posted December 11, 2022 Share Posted December 11, 2022 Trying out the Casio Music Space I find the BT connection procedure unusual. Whenever I start the app I have to reconnect the BT midi to my px-s1100 manually. With BT audio I just have to turn on my notebook and it will connect automatically. Shouldn't that be the case for BT midi too? Afterall I need an app, CMS or 3rd party, to utilise BT midi so why can't it just remember the connection? Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted December 11, 2022 Share Posted December 11, 2022 Only 1 app and 1 keyboard can connect with Bluetooth MIDI at a time. This is different than audio, where multiple apps can stream audio through the same Bluetooth connection. Each Bluetooth MIDI capable app installed on a device has to disconnect before another app can use the connection. Quote Link to comment Share on other sites More sharing options...
Sbc Posted December 13, 2022 Share Posted December 13, 2022 (edited) Yes, I have only 1 phone with the app and 1 PX-S1100. Every time I close the app or switch off the piano, and start the app or switch on the piano again I have to go into 'connection settings' and reconnect. It would be nice if the app can remember the last connection and automatically reconnects. *Sorry to have hijacked this thread, but I was thinking maybe this is somehow related to OP's problem. Edited December 13, 2022 by Sbc Quote Link to comment Share on other sites More sharing options...
yvesapsy Posted May 21, 2023 Share Posted May 21, 2023 I'm trying to connect my px-s1100 to a lenovo m10 tablet using Casio Music Space and it crashes right after I select the WU-BT10 Midi. Already tried clearing all app data and no success yet. Any other tips on how to connect it using Bluetooth? Could it also be the android version (12 in this case) or Bluetooth version on the tablet the main issue? Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted May 21, 2023 Share Posted May 21, 2023 According to the app description page, there is a bug identified with Android 13 that prevents Bluetooth from working correctly, so they recommend using a cable instead. It sounds like something on your device is causing the same issue. Perhaps try using a cable as they suggested. Quote Link to comment Share on other sites More sharing options...
Robinsongs Posted May 28, 2023 Share Posted May 28, 2023 I would be fine if you could hook it up with a cable. That won't even connect for me. ( According to the app, anyway.) Also, the app will only allow piano remote control through Bluetooth. I'm getting the same as everyone here. Audio pairs instantly, midi won't at all. I can't ever see a situation where I would want to send audio through the speakers, but I need the remote to organize/trigger beats and organize/program sounds . Disappointed is an understatement. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted May 28, 2023 Share Posted May 28, 2023 9 hours ago, Robinsongs said: I would be fine if you could hook it up with a cable. That won't even connect for me. ( According to the app, anyway.) Also, the app will only allow piano remote control through Bluetooth. I'm getting the same as everyone here. Audio pairs instantly, midi won't at all. I can't ever see a situation where I would want to send audio through the speakers, but I need the remote to organize/trigger beats and organize/program sounds . Disappointed is an understatement. Which model Casio? Which model phone or tablet? Which cable are you using? Did you try powering off your phone/tablet and restart? What, if any, messages are you seeing in the Casio Music Space app connection settings menu when trying to connect to Bluetooth MIDI? Quote Link to comment Share on other sites More sharing options...
jocar37 Posted October 17, 2023 Share Posted October 17, 2023 I've been told by a Casio tech that the Wu-BT10 will in fact allow me to play VSTs over a Casio Privia PX stage piano. I understand however that Bluetooth doesn't have quite the throughput of an actual interface. So I'm concerened about latency. It sounds like a lot of people here have had issues. Has anyone who has used the adapter find that it did allow VSTs on a computer to be played through the piano, and if so, did you notice a latency problem? If so, please advise which Casio model you used, and what kind of device and cable you used. May seem like dumb questions, but I've been having fits for months trying to find a stage piano that will let me play VSTs, at least not without jumping through several ridiculous hoops. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted October 17, 2023 Share Posted October 17, 2023 22 minutes ago, jocar37 said: Has anyone who has used the adapter find that it did allow VSTs on a computer to be played through the piano, and if so, did you notice a latency problem? If you have a Casio piano compatible with the WU-BT10 Bluetooth adapter, it enables the piano to be used as a Bluetooth MIDI controller with Apple and Android devices. Windows is not compatible with WU-BT10 Bluetooth MIDI. No third party solutions have been shown to work. Windows is compatible with Bluetooth audio however. The WU-BT10 adapter can be used for wireless MIDI, or it can be used to receive Bluetooth audio, but not both at the same time. Latency is not an issue when using Bluetooth MIDI. Note that some computers and mobile devices can have latency in their audio processing. Faster devices with optimal audio drivers will reduce this latency to acceptable levels. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.